Have you ever imagined a special vape device combining the advantages of both pod devices and box mods? Now the RPM40 appears as you required! It is small in size but has a battery capacity of 1500mAh and a power range of 1W-40W for you to adjust. The internal IQ-R chip is a new one, shortening the firing time to 0.001S, and charging time to two hours. Besides, the newly designed RPM Mesh 0.4Ω Coil is designed for the best flavor and excellent vapor production. Innovation keeps changing the vaping experience!
Modern & Sleek
RPM40 is an ultra-portable pod mod that shapes like a cuboid,
and is covered with glossy finish and characteristic material, making the whole device look fancy and stylish.
Size: 25 x 25 x 99mm
Battery Capacity: 1500mAh built-in
E-Juice Capacity: 2ml (EU 2ml Edition)/4.5ml (Standard Edition)/4.3ml (Standard Edition)
Standby Current: <140uA
Input Voltage: 3.3V-4.2V
Output Voltage: 0.5V-4.1V
Firing Time: 0.001S
Output Wattage: 1W-40W
Charging Current: 0.88A (Max)
Charging Voltage: 5V
Output Mode: Watt
Resistance Range: 0.2ohm - 2.5ohm
Overcharge Voltage: 4.3V
Over-discharge Voltage: 2.4V
1500MAH Battery Capacity
Built-in 1500mAh battery is the power source of RPM40, which can ensure enough running time and help you avoid frequent charging.
The RPM40's wider mouthpiece allows more air inhalation, just like the drip tip of a classic box mod, you can Fully enjoy the vaping process and huge vapor.
MAX OUTPUT POWER---40W
With a power range from 1W to 40W, RPM40 guarantees massive vapor, and you can press the UP/DOWN button to get your preferred power.
Different from normal tiny and slim pod devices, RPM40 is designed with a 0.96-inch screen,
with which, detailed vaping data is clearly presented, like the wattage, resistance, voltage, screen color, puff number, and battery level.
More Coil Options for Rpm Pod
The kit includes two RPM pods that are compatible with the coils of RPM series and Nord series respectively.
RMP NORD Pod
RPM Standard Pod
They can be distinguished by the rubber plug color (Red/Black) and the corresponding text ("RPM"/"NORD") on the rubber plug.
Large E-Liquid Capacity
The included pod has 4.3ml e-liquid capacity when RPM Mesh 0.4Ω Coil is installed, and 4.5ml when Nord DC 0.6Ω Coil is installed,
whichever coil you installed, you can enjoy long and relaxing vaping.
There’s a USB port at bottom of the device, you can charge it via USB cable. Its charging time has been shortened to 2 hours; you don’t need to wait too long for a cozy vaping.
RPM40 provides multiple protections to avoid potential risks.
8 Seconds Cut-off
Short Circuit Protection
Low voltage protection
How to Fill With E-Liquid
Do not vape immediately after full filling the pod, and let the device stand for 2-3 minutes to get its cotton completely saturated.
1. Pull out the pod;
2. Pull out the rubber plug on the slot and add e-liquid through the slot;
3. Press the rubber plug back carefully and firmly.
NORD Coil Introduction:
Nord Regular DC 0.60 coil (Kit Includes)
0.60 Dual coil faster heating process & higher flavor intensity
Recommended Wattage: 20W
Nord Mesh-MTL 0.80 coil (Optional)
Mouth to lung more clouds and flavor more intense and longer lifespan
Max Power: 16W
Nord1.40 regular coil (Optional)
Perfect choice for MTL lover’s High concentration of vapor
Nord 0.60 mesh coil (Optional)
Specially Designed For sub-ohm vaping Bring you massive vapor
RPM Mesh 0.40 Coil (Kit includes)
For best flavor Fast heating process
RPM Triple Coil 0.60 (Optional)
Fast ramp-up time Excellent Flavor & vapor production
RPM Quartz 1.2 0 Coil (Optional)
Purer Flavor Fast heat uptime
RPM MTL Mesh 0.30 Coil (Optional)
Mouth to lung Massive vapor & excellent flavor More power-efficient & longer life span
RPM SC 1.0 Coil
Intense flavor and denser vapor
Wattage: 14W (Best)
RPM RBA Coil (Optional)
Enjoy the DIY pleasure Bring you massive vapor and purer flavor 0.60 Coil.
The RPM RBA coil supports coils with a minimum resistance of 0.250
Special RPM RBA Unique Vaping Pleasure
RPM RBA Coil is specially designed by SMOK engineers to help you find your individual vaping style.
In addition, a screwdriver is included to make it easy and convenient to rebuild the coil.
RPM RBA Enjoy the DIY pleasure
- Before starting, make sure your hands are clean.
- Take RBA deck apart.
- Installing and positioning the pre-wrapped coil. Place the coil between the posts and wrap the ends around the screws and tighten up, once all in place make sure the coil is fixed in the center and lined up with the air hole, and also make sure the coil is NOT touching the base.
- Cut the ends of wire off
- Cut a strip of cotton and make sure it’s not too much and not too less.
- Insert the cotton, and placing it in the middle.
- Cut the cotton at an angle and make sure it's not too short and not too long.
- Wet the coil with your e-liquid and adjust the cotton.
1 X RPM40 Device (1500mAh)
1 X RPM Standard Pod (RPM Mesh 0.4ohm Coil Preinstalled) (4.3ml)
1 X RPM Nord Pod (Nord DC 0.6ohm Coil Preinstalled) (4.5ml)
1 X USB Cable
1 X User Manual
Warring: Coil Must be Checked for Resistance before they are fired on a device, and rechecked periodically to ensure the resistance remains the same.