Input: DC 5V/2A 9V/2A 18W (MAX)
Output voltage: 4.35V±1% / 4.2V±1% / 3.7V±1% / 1.48V±1%
Output current: QC Mode: 1,500mA*2 (MAX)
Standard Mode: 1,000mA*2 (MAX)
Compatible with: IMR/Li-ion/LiFePO4: 10440, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 17700, 18350, 18490, 18500, 18650, 18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650, 26700, Ni-MH/Ni-Cd: AA, AAA, AAAA, C, D
Nitecore Intelligent USB UM2
QC Input Available
Total Max Output of 3,000 mA
with Single Slot Max Output of I ,500 mA
LCD Display for Real-Time Charging Information
USB Charging Port for Outdoor Charging
QC Input Enabling a Total Max Output of 3000 mA
Single Slot Max Output of
2 Hours to Charge 80% of
A 3,500mAh battery
The stated data is tested according to relevant
Standards and tor references only.
Non-QC Input: The default charging current tor Li-ion batteries is 0.5A. The max charging current can be set to IA. The voltage of the battery is 4.2V when fully charged
Specially Optimized for
IJM2 incorporates an optimized IMR battery charging program, which is able to monitor the
The entire charging process, ensuring that the cut-off voltage is always within safe limits to extend the lifespan of the batteries.
LCD Display for
Short press the V button to cycle through different charging information.
UM2 will automatically select between 3 charging modes (CC, CV and -dV/dt) according to the battery type and capacity.
The charging parameters can be set manually to meet various charging needs.
Long press the C button to enter the Charging
Charging Voltage Selection: 3.7V/4.2V/4.3V
Charging Current Selection: 100mA-I.500mA
USB Adaptor I Power Bank I Solar Panel
When an over-discharged IMR battery is inserted, the screen will show 'EE BE".
In this case, long-press the V button to enter
After that, the charging process will continue.
The IJM2 is capable of activating over.
Discharged Li-ion batteries with a protective circuit. After battery installation, UM2 will test and activate the battery before charging. When a battery is detected as damaged, the screen will snow 'EE
Anti-short Circuiting and Reverse Polarity
If there are batteries inserted with polar reversed or short-circuited, the screen will flash to show EE'.
Energy Saving Function
If there is no action to the buttons or batteries in 10 minutes,
the screen will automatically go dim to save energy.
Durable and Fire
Fearless of the complex outdoor
The built-in temperature regulation system is designed to prevent the overheat and to ensure the stability of the charging process
The cooling fins on IJM2 are designed to enable extreme cooling performance to dissipate heat rapidly to avoid possible hazards.
Authenticity and Safety
On all authentic NITECORE chargers' package boxes, there is a 16-cdigit validation code and a validation
QQ code. You can also purchase from the authentic NITECORE charger alliance.
Intelligent USB Cud-Slot Charger
QC 20 input available
Capable of charging 2 batteries simultaneously
Controlling each slot independently
Up to 1 charging 1500mA charging speed In a single slot
Compatible with Li-Ion and Ni-MH/Nl-Cd batteries with automatic detection.
Automatic detection of battery power level and automatic selection of appropriate voltage and charging mode. (Life of PO4 and 3.8V Li-ion batteries excluded).
Automatic selector, between 3 modes
(CC CV and dv/dt)
Energy-efficient LCD display for real-time charging Information.